Cold Rolled 4x8 Stainless Steel Sheet 202 201 2mm SS Sheet

Stainless steel is generally a general term for stainless steel and acid-resistant steel. Medium-thickness plates are usually called steel plates, a type of plate whose thickness is much smaller than the plane size commonly used in engineering. Although the thickness is small, the deformation and bending deformation caused by the transverse shear are of the same magnitude. When analyzing the stress and deformation under static load, the transverse shear effect must be considered. The normal stress perpendicular to the plate surface can be ignored . When analyzing the stress and deformation under dynamic load, in addition to considering the transverse shear effect, the inertial force and damping moment of the micro-segment must also be considered. Medium and heavy plates have long been widely used in the machinery industry. There are two types of hot rolling and cold rolling according to the manufacturing method, including thin plates with a thickness of 0.5-4 mm and thick plates with a thickness of 4.5-35 mm. According to the structural characteristics of the steel type, it is divided into 5 categories: austenite, austenite- Ferrite type, ferrite type, martensite type, precipitation hardening type. The stainless steel plate has a smooth surface, high plasticity, toughness and mechanical strength, and is resistant to corrosion by acids, alkaline gases, solutions and other media. It is an alloy steel that is not easy to rust, but it is not absolutely rust-free. .